Beiträge von 260E

    Gerold for you:


    On it we see:
    S40 - the speed control switch
    on it:
    A - Off
    V - slowing
    B - overclocking
    SP - a return to the entered into the memory block ECU speed....


    S9 - switch of stop signal (trailer)
    M16 - the speed control actuator (motor thrust gas)
    N4 - electronic control unit for speed control (cruise control brains)
    B6 - speed non-contact sensor (Hall sensor)


    a - to plug "15", the fuse number 5 ("")
    b - to the connector block 15 monitoring of correct bulbs (and after the block on the bulb itself stoplight)


    W1 - the main point of connection with the "mass" (behind the instrument cluster)
    X20 - socket switch of stop signal


    First of all, remove the trim under the steering wheel and on the beam (above the knee), we find a large metal box "N4" - Cruise control brains. Disconnect the unit from a large piece take the hands of Testori. In all contacts signed pieces, turn on the ignition and start "prozvanivatsya":


    start with food:
    12 - weight
    1 - a permanent '+'
    8 - "+" appears when you press the brake
    if you are looking for a problem in this connector at the top of the brake pedal where trailer brake light (it's cruise control feature should be located in the right udlenitelem)


    examine the mechanism:
    5 and 8 - should prozvanivatsya (electromagnetic coil, which is located within the electric cruise control (presses the gear to the electric motor, thereby pulling the electric motor when operating traction gas)) (can be submitted by 8 'mass' and 5 '+' should be clicking a relyushaka )
    10 and 7 - must prozvanivatsya (itself an electric motor (can be submitted by 10 "+" 7 "a lot" or vice versa, would hardly buzz, but will not pull the rod as read above))
    12 and 11 - should be from 0 to 12 volts (Hall sensor that is in the speedometer), and begin to connect Testori barely move will show from 0 to 12, and when moving about 7.5 volts.
    9 and 13 - should be well ...


    check the handle:
    1 and 6, 2, 4 - should prozvanivatsya the relevant provisions of the handle
    1 and 3 - ring all the time except the position of the handle to "off"

    Gerold: Okey,Ich gebe zu.Ich bin Jetzt in USA/California!!!Und wohne hier!!!!!!!! Habe 2 Auto.Eine w124 E260,und andere w140 S600.


    Nun ich will wissen.Habe dass Bild gelegt, Hinten des Speedometr sind 2 kabeln.Braun und Scharz.Sie diese beide minus oder eine + ,und der andere minus?
    So wie,
    Schwarz - minus , und der braun pilus, oder nicht so?Konnen sie dass mir sagen.


    p/s Please do not worry, i will not geve panic or etc...Only discusion from cruis control,and i will close this theme,Its okey?
    Gruss, Vika

    nein,nein und nochmal nein!!!!!!!!!
    es funktionirt wieder nicht.habe einen anderen ecu und motor genommen.
    12 habe ich gegeen -
    1 habe gegeben +
    in mein tisch alles gelegt.ich teste dort.es arbeitet nicht...


    in 5 gebe ich + in die 8 - von motor kommt etwas, dann noch etwas 10 gebe ich + in 7 gebe ich - ,motor dreht sich.
    frage welche kontakte soll ich etwas storm geben um es in mein tisch testen? ich will meinen dass ein schalten, speichern oder einschalten stecker...
    1 und 2,4,6 gebe kontakt wird es nicht.wie kann ich dass testen?


    Ich danke ihnen. Ich habe dass ganze Tempom,at system raus gemacht.jetzt habe die farben wie sie gesagt haben gelegt. in rote gebe ich "+" in die brauch die "COM -", aber dass tempomat geht einfach nicht, arbeitet nicht, Habe geschaut, es hatt 12 V , aber dass motor gibt keine reflektion, Wenn ich allein in dass motor gebe Storm, es wird funktioniren, aber von system nicht, ist dass Steurgerat kaput oder wass?
    gruss, Vika

    Hallo.Ich hatte problem in Tempomat.habe es raus gemacht.Aber wenn ich raus machte , habe von Steuergerat die kabel raus gemacht.Jetzt weiss ich nicht welche farbe in welche stecker sein soll.Nur weiss ich genau dass "1" ist "+".Dort sind 13 farben...
    Kann jemand mir sagen?
    Es ist von ein wagen w124 / M103
    gruss,Vika