My abs brakes're a mystery, when I drive so can abs brakes work excellently, and sometimes them stop working and the abs lamp lights up ... it can hold a few times until you finally turn it off.
What can cause this error?
Abs brake problems w124 230e -88
-
your ABS Brake is a very hungry customer. If there´s not enough tension from battery, it fails. Teh tension of battery is caused by function of power generator, where the tension regulation is situated. In it there are Chars, that might be reduced. But not fully, so the problems occurs only sometimes. I think it would be useful to change the tension regulator and your problem should be soved. May be only the change of the chars would do the same job. It´s cheaper.
-
Okay, but how do i do it?
Can not be loose in some cable or something? 
-
Okay, I´ve got it.
The tension regulator is screw fixed on the edge of the power generator. A new one costs about 10 or 20 € different from trade marks. Look at Taxiteile Germany, you can get one there. To change it, is no problem.Look here:
http://www.te-taxiteile.de/shop/catalog/search?shop_param=
Ups...forgotten. If you buy here, must tell your nickname in this forum. You get 10 % lower price (Forum rabat).
-
Okay will check it, thanks
-
I find another control unit to the abs, it is possible to examine the change of the see if they can be the box that they are wrong?
Is it the one behind the control box (the injection behind the battery)?Now have to admit I am a very inquisitive person and apologize for it but I am a blonde
