Schwarz .... wie Langweilig ...
Restaurationsbericht des Unimogs 411.117 U32
-
-
Wuhaaaa....das Ist Grundierung mein gutster Nee der Rahmen wird Glanzschwarz (also Rahmen, Achsen und das Getriebe und die Anbauteile wie Tank Batteriekaste.....) Orginale Farbtöne halt (soll ja mehr so ein Sonntagsspasshabenoldtimermitallrad werden....
-
schaut gut aus...bin schon gespannt wie er aussieht wenn er frtig ist...
-
Sodele, noch ein Bildchen von oben:
[Blockierte Grafik: http://up.picr.de/1216470.jpg]Es sind auch einige Anbauteile nun Grundiert (Druckluftleitungen, Tank, Zapfwelle) und teilweise verbaut (Zapfwelle) demnächtst wird dann weiter Montiert und gelackt
-
Oh man,Unimog roxxxxxxxxxxxxxxxxxxx
-
So es hat sich wieder einiges getan:
[Blockierte Grafik: http://up.picr.de/1220021.jpg]
[Blockierte Grafik: http://up.picr.de/1220022.jpg]
[Blockierte Grafik: http://up.picr.de/1220023.jpg]
[Blockierte Grafik: http://up.picr.de/1220024.jpg]
Die Hintere Strebe ist nur mal so draufgelegt zum schauen. Zapfwelle ist nun auch verbaut....
[Blockierte Grafik: http://up.picr.de/1220050.jpg][Blockierte Grafik: http://up.picr.de/1220051.jpg]
[Blockierte Grafik: http://up.picr.de/1220052.jpg]
Sorry für die Quali....HandyCam[Blockierte Grafik: http://up.picr.de/1228830.jpg]
-
es geht wieder weiter so sieht er nun aus der Gute:
[Blockierte Grafik: http://up.picr.de/1286431.jpg][Blockierte Grafik: http://up.picr.de/1286432.jpg]
[Blockierte Grafik: http://up.picr.de/1286433.jpg]
Kipperspinne, Zugmaul, Kotflügelgestelle und die Presslufttankhalterung sind Montiert. Die HA Federn und Zusatzfedern sind nun in ihrer Endposition und festgeschraubt. Morgen kommt dann das Lackfinish (RAL 9005 -> Schwarz) drauf und somit ist der Rahmen komplett fertig mit Lackieren. Der Batteriekasten, Tank und Druckkessel werden im Ausgebauten Zustand Lackiert und am Mittwoch dann die Stellen die durchs Festschrauben bzw Montieren verkratzt wurden ausgebessert. Dann wird auch die Kabine geholt und aufs Lackieren (Farbwahl ist getroffen auf RAL 7016 -> Anthrazitgrau) vorbereitet. Hab ja nun 2 Wochen Urlaub und da muss wieder einiges Passieren denn am WE ist ja Unimogtreffen .... -
So heute wurde nun der Rahmen in Schwarz Glänzend (RAL 9005) lackiert. Der Tank und der Batteriekasten wurden im Ausgebauten Zustand schon vorlackiert (die Stellen an die man später nicht mehr ran käme) und werden morgen fertig lackiert (u.A. auch die Stellen die durchs anbauen wieder verkratzt wurden).
Und hier die Bilder:
[Blockierte Grafik: http://up.picr.de/1289150.jpg][Blockierte Grafik: http://up.picr.de/1289151.jpg]
[Blockierte Grafik: http://up.picr.de/1289152.jpg]
[Blockierte Grafik: http://up.picr.de/1289153.jpg]
-
echt super gemacht, respekt für den aufwand und die saubere arbeit.
-
Danke! Sowas höre bzw lese ich sehr gerne, was mir immer wieder zeigt das es richtig ist was ich mache!
-
Das wird ´n Spitzenunimog Jünge!
-
haste echt gut gemacht mein lob
-
Dankeschön!
-
mal ne bescheide Frage: so von wietem sieht das echt spitze aus,... wie hast du das mit den beweglichen Teilen gemacht,... das sieht so aus als hättest du das alles im zusammengebauten Zustand gemacht,... ich hab ja net alzuviel Ahnung von lackierarbeiten,,... aber nicht dass dir das geht wie wenn man n Fahrrad mit eingebauter Tretkurbel spritzt
-
mach weiter so, das schaut doch schon ganz gut aus.
-
Hi, ganz einfach, da sind nicht viele sich bewegende Teile! Die einzigsten sind Vorne die Achsschenkel (aber die kann man nicht so einfach zerlegen) und die Gelenke von der Zapfwelle aber da sehe ich kein Problem. Ich hab eigentlich alles soweit zerlegt und vorher schon ordentlich grundiert (2K-Grundierung)....ich weis net aber da kann ja der Jo mehr dazu sagen....
-
sollte keine Kritik sein, jens,..
ich bin davon überzeugt, dass du nur erstklassige arbeit machst,... war bloß rein Interesse halber,...weiter so -
Jo dein Thread war ja auch nicht als Kritik gesehen.....
-
Zitat von "Sternenmechatroniker"
Jo dein Thread war ja auch nicht als Kritik gesehen.....
wir verstehn uns
-
hehe...Blind